This oak hardwood floor was is South Minneapolis close to Edina. The floors were in pretty bad shape, but they just needed a good sand to clean them up.
The picture above is a pretty ugly water stain. They don’t come out most of the time, but there are a couple things you can do to remove them. On this one, I sanded the floor completely, then I took a wet rag, and got the stain wet a few times, let it dry out, then got it wet again.
After it dried, I sanded the stain out. I don’t recommend doing this if you are not a professional floor mechanic. As you can see from the picture below we got the stain out.
It took some effort but it was worth it. From the picture below you can see the floor is cleaned up and the has the final finish coats on it.
{ 0 comments… add one now }
Leave a Comment